;;==========================================================================;; ;; Joe Zbiciak's Space Patrol for Intellivision. ;; ;; Copyright 2007, Joe Zbiciak, intvnut AT gmail.com. ;; ;; http://spatula-city.org/~im14u2c/intv/ ;; ;;==========================================================================;; ;;==========================================================================;; ;; UPBGP Update buggy velocity and related ground-phase info. ;; ;;==========================================================================;; UPBGP PROC ;;------------------------------------------------------------------;; ;; Do velocity updates for buggy and related ground phase updates. ;; ;;------------------------------------------------------------------;; MVI JHGT, R1 ; 10 TSTR R1 ; 6 BNEQ @@njvl ; 7/9 Don't update horiz vel when in air ;---- ; 25 (taken case) ; 23 (fallthru case) MVI WANTVL, R1 ; 10 Get the "desired velocity" MVI GRATE, R0 ; 10 Get current buggy velocity SUBR R0, R1 ; 6 Find diff between desired and actual BEQ @@njvl ; 7/9 If none, just fall through BMI @@vnr ; 7/9 If below, round down when dividing ADDI #31, R1 ; 8 If above, round up when dividing @@vnr: SARC R1, 2 ; 8 Divide difference by 32. (signed) SARC R1, 2 ; 8 SARC R1, 1 ; 6 CMPI #$FFFE, R1 ; 8 \ BGE @@vdok ; 7/9 |-- Don't slow down too fast. MVII #$FFFE, R1 ; 8 / @@vdok: ; Add diff to rate, so we grow towards ADDR R1, R0 ; 6 desired rate gradually, rather ; than all at once. MVO R0, GRATE ; 11 save updated velocity. At the ; start of the game, the vel may be ; "-ve" while buggy scrolls onscreen. ;---- ; 110 (worst case) ; 23 (carried forward) ;---- ; 133 (worst case) @@njvl: ;;------------------------------------------------------------------;; ;; Update the "phase" of the ground plane. ;; ;;------------------------------------------------------------------;; MVI GRATE, R0 ; 10 Get our buggy's velocity INCR R0 ; 6 Allow 0x001 - 0x100. @@grok: MOVR R0, R3 ; 6 Save clamped rate in R3 ADD GPHASE, R0 ; 10 Add it to our "ground phase" ANDI #$FFF, R0 ; 8 @@gpok MVO R0, GPHASE ; 11 Store updated phase. SWAP R0, 1 ; 6 Put integer in lower byte ;---- ; 57 (worst case) ; 133 (carried forward) ;---- ; 190 (worst case) ;;------------------------------------------------------------------;; ;; Calculate ground graphics pointer ;; ;;------------------------------------------------------------------;; MVO R0, PGPHAS ; 11 Save current phase as previous phase ANDI #$7, R0 ; 8 MOVR R0, R2 ; 6 Copy current pos to generate pointer ADDI #GROUND,R2 ; 8 \ MVI@ R2, R2 ; 8 |-- Look up ground pixel pattern. MVO R2, GDATA ; 11 / and copy it out. MVI SPAT, R2 ; 10 \ CMPI #SPATBL.hut0, R2 ; 8 |- suppress rock/crater update if BEQ @@norock ; 7/9 / hut is onscreen (shares GRAM) MOVR R0, R2 ; 6 \ SLL R2, 1 ; 6 | ADDR R0, R2 ; 6 |-- R2 = pixel*48 + rock/crater tbl SLL R2, 2 ; 8 | SLL R2, 2 ; 8 | ADDI #ROCKCRAT,R2 ; 8 / MVO R2, RPTR ; 11 Save rock/crater data pointer @@norock ;---- ; 130 (worst case) ; 190 (carried forward) ;---- ; 320 (worst case) ;;------------------------------------------------------------------;; ;; Update buggy's jump state. ;; ;;------------------------------------------------------------------;; MVI JVEL, R0 ; 10 \ Add our current vertical vel XORI #$80, R0 ; 8 |__ to our jump height, and accel SUBI #$81, R0 ; 8 | downwards. MVO R0, JVEL ; 11 | ADD JHGT, R0 ; 10 / BGT @@jok ; 7/9 If this makes it -ve, stop the jump INCR R0 ; 6 \___ Zero if already on ground ADD LANDED, R0 MVO R0, LANDED ; 10 / Non-zero if just landed CLRR R0 ; 6 \___ Otherwise, we hit ground so set MVO R0, JVEL ; 11 / velocity to zero. MVO R0, JHGT ; 11 @@noj: B @@gwhl ; 9 ;---- ; 107 (worst case) ; 320 (carried forward) ;---- ; 427 ;;------------------------------------------------------------------;; ;; Update the wheels on the buggy. ;; ;;------------------------------------------------------------------;; @@jok: MVO R0, JHGT ; 11 \ Pull wheels all up MVII #WHEELS.jump, R4 ; 8 |- while jumping. B @@gdone ; 9 / ;---- ; 28 @@gwhl: MVI GRATE, R1 ; 10 Get buggy's velocity ; INCR R1 ; 6 SAR R1, 2 ; 8 Divide it down ADD PGPHAS, R1 ; 10 Add it to ground offset to get ; relative position of buggy to ground. ANDI #7, R1 ; 8 Modulo 8 (1 card) SUBI #8, R1 ; 8 1st table is 8 words before @@data MVII #WHEELS.data, R4 ; 8 \ ADDR R4, R1 ; 6 |-- Look up desired wheel ADD@ R1, R4 ; 8 / orientation. @@gdone MVO R4, WPTR ; 11 Save resulting pointer to gfx data. ;---- ; 83 (worst case) ; 427 (carried forward) ;---- ; 510 ;;------------------------------------------------------------------;; ;; Now calculate the "top" and "mid" mountain "phases": ;; ;;------------------------------------------------------------------;; MOVR R3, R0 ; 6 Get clamped rate into R0, R1 for top MOVR R3, R1 ; 6 mtn, and R2, R3 for mid mtn. MOVR R3, R2 ; 6 SAR R1, 2 ; 8 \ ADDR R1, R0 ; 6 |__ Determine "top mtn" rate as SAR R0, 2 ; 8 | fraction of buggy's base rate. SAR R0, 1 ; 6 / R0 = TRATE = 0.15625 * GRATE ADD TPHASE, R0 ; 6 Add TRATE to current phase ANDI #$1FFF, R0 ; 8 MVO R0, TPHASE ; 11 Save new top-mountain phase. ;---- ; 71 ; 510 (carried forward) ;---- ; 581 ADDR R3, R2 ; 6 \ SAR R2, 2 ; 8 | Determine "mid mtn" rate as MOVR R2, R3 ; 6 |-- fraction of buggy's base rate. SAR R3, 2 ; 8 | R2 = MRATE = 0.28125 * GRATE SUBR R3, R2 ; 6 / ADD MPHASE, R2 ; 8 Add MRATE to current phase MVI MIDMSK, R3 ; 10 SWAP R3 ; 6 COMR R3 ; 6 ANDR R3, R2 ; 10 MVO R2, MPHASE ; 11 Save new mid-mountain phase. ;---- ; 85 ; 581 (carried forward) ;---- ; 666 ;;------------------------------------------------------------------;; ;; Decide which mountains need moving, and which mountains we can ;; ;; actually move according to round-robin priority. ;; ;;------------------------------------------------------------------;; SWAP R0, 1 ; 6 SWAP R2, 1 ; 6 ANDI #$1F, R0 ; 8 Strip fractional portion of TPHASE ANDI #$3F, R2 ; 8 Strip fractional portion of MPHASE CLRR R3 ; 6 For do-none case MVI TSKIP, R1 ; 10 If TSKIP == 0, top has priority CMPR R3, R1 ; 6 ;---- ; 50 ; 666 (carried forward) ;---- ; 716 BEQ @@tprio ; 7/9 yes, check top b4 mid, else mid b4 top @@mprio CMP PMPHAS, R2 ; 10 If doing mid, see if mid needs it. BNEQ @@do_mid ; 7/9 yes -- update mid @@tprio CMP PTPHAS, R0 ; 10 If doing top, see if top needs it. BNEQ @@do_top ; 7/9 yes -- update top CMP PMPHAS, R2 ; 10 If top didn't need it, check mid. BEQ @@do_none ; 7/9 if mid needed it, update mid. ;---- ; 60 tskip != 0, do_none <-- ; 45 tskip == 0, do_none ; 43 tskip != 0, do_top ; 43 tskip == 0, do_mid ; 26 tskip != 0, do_mid ; 28 tskip == 0, do_top @@do_mid: ; Bits 2..0 of MPHASE give pixel alignment ; Bits 5..3 of MPHASE give char. alignment if not CITY ; Bits 4..3 of MPHASE give char. alignment if CITY MVO R2, PMPHAS ; 11 Store our new previous "mid" phase MOVR R2, R3 ; 6 Copy MPHASE to R3 for calculation ANDI #7, R3 ; 8 Keep bits 0..2 for gfx ptr generation SWAP R3 ; 6 \ Each "phase" takes up 32 words SLR R3, 2 ; 8 |- of ROM, so multiply by 32. SLR R3, 1 ; 8 / MVI MIDGFX, R0 ; 10 Offset into "middle-mountain" gfx SWAP R0 ; 6 ADDR R0, R3 ; 6 CLRR R1 ; 6 Set flag so we give top mtn prio next CMP INCITY, R1 ; 10 Are we in the city? MVO R1, TSKIP ; 11 Give top prio next frame BEQ @@ncity ; 7/9 No: do 'crater' mid-mountain update ANDI #$18, R2 ; 8 SLL R2, 1 ; 6 B @@iscity ; 9 @@ncity ANDI #$38, R2 ; 8 MVII #MIDGR, R0 ; 8 @@iscity MVII #MIDGR, R0 ; 8 ADDR R0, R2 ; 8 Point to middle-mountain in GRAM B @@m_done ; 9 ;---- ; 151 (worst case) ; 43 (worst case coming to mid) ; 716 ;---- ; 910 (worst case) @@do_top: ; Bits 2..0 of TPHASE give pixel alignment ; Bits 4..3 of TPHASE give char. alignment MVO R0, PTPHAS ; 11 Store our new previous "top" phase MOVR R0, R3 ; 6 Copy TPHASE to R3 for calculation MOVR R0, R2 ; 6 ANDI #7, R3 ; 8 Keep bits 0..2 for gfx ptr generation SWAP R3 ; 6 \ Each "phase" takes up 32 words SLR R3, 2 ; 8 |- of ROM, so multiply by 32. SLR R3, 1 ; 8 / ADDI #TOPMOUNT,R3 ; 8 Offset into "top-mountain" gfx MVII #2, R1 ; 8 (as side effect sets mid to top prio) CMP INCITY, R1 ; 10 MVO R1, TSKIP ; 11 Give mid prio next frame BNEQ @@asis ; 7/9 \ Display rock background if ADDI #ROCKBG-TOPMOUNT,R3 ; 8 / in underground. @@asis: ANDI #$18, R2 ; 8 SLL R2, 1 ; 6 MVII #TOPGR, R0 ; 8 ADDR R0, R2 ; 8 Point to top-mountain in GRAM ;---- ; 135 (worst case) ; 43 (worst case coming to top) ; 716 ;---- ; 894 @@m_done: MVO R0, MGRAM ; 11 @@do_none: ; R1 is zero on this path MVO R3, MPTR ; 11 Save this as our gfx ptr. MVO R2, MGOFS ; 11 Save that as our mountain GRAM ptr. ;---- ; 33 ; 910 (worst case) ;==== ; 943 final, worst case ENDP __ ;* ======================================================================== *; ;* This program is free software; you can redistribute it and/or modify *; ;* it under the terms of the GNU General Public License as published by *; ;* the Free Software Foundation; either version 2 of the License, or *; ;* (at your option) any later version. *; ;* *; ;* This program is distributed in the hope that it will be useful, *; ;* but WITHOUT ANY WARRANTY; without even the implied warranty of *; ;* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU *; ;* General Public License for more details. *; ;* *; ;* You should have received a copy of the GNU General Public License *; ;* along with this program; if not, write to the Free Software *; ;* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. *; ;* ======================================================================== *; ;* Copyright (c) 2007, Joseph Zbiciak *; ;* ======================================================================== *; _